Tag: party

JULY FOURTH:
Patriotic Rice Krispies

 

 

 

Need a quick and easy dessert idea for your 4th of July get together? We have it for you here! Rice Krispie Treats are perfect for a last minute dessert, not too heavy on the tummy, and always a huge hit with the kiddos! This recipe takes about 15 minutes total including decoration – you can’t beat that!

 

Ingredients

3 T Unsalted Butter

10 oz. Package Marshmallows

6 cups Rice Krispies Cereal

16 oz. Betty Crocker Vanilla Frosting

Patriotic Sprinkles

 

Supplies

Nonstick Deep Skillet

Silicone Spatula

Large Mixing Bowl

13” x 9” x 2” Pan

Wax Paper

1 Plastic Sandwich Bag

Scissors

 

 

Directions

Melt the butter over low heat in a deep skillet, or large saucepan. Once butter is melted, add entire bag of marshmallows and stir frequently with silicone spatula until all marshmallows are melted. Remove from heat.

 

In a large mixing bowl add 2 cups Rice Krispies cereal and roughly 1/3 of melted marshmallows. Continue with two more layers of 2 cups cereal and 1/3 melted marshmallows until all melted marshmallows and 6 cups of cereal have been added. This layering technique makes coating the cereal with the melted marshmallows much easier. Stir with silicone spatula until well coated.

 

Line 13” x 9” x 2” pan with wax paper. Pour rice krispies into pan and press with spoon or more wax paper.

 

TIP: You can coat the pan with cooking spray or butter, but I find wax paper easiest when kids are involved. The wax paper prevents any sticking and helps to protect your pan from scratches when trying to cut the sticky rice krispies!

 

 

Decorating

Let the rice krispies cool for a minute to make sure the frosting does not melt when you decorate. Once cooled, add a spoonful of vanilla frosting into the corner of a sandwich bag and twist the bag at the top of the frosting. Press out air, seal the bag, and snip off the corner of the bag where the frosting is located. Be careful not to snip a large chunk off the corner of the bag, a tiny snip will suffice. Slowly squeeze the bag at the top of the frosting while holding the twist and keep a steady pressure while decorating. I chose to do a simple zig-zag pattern beginning and ending in opposite corners. Feel free to get creative with it!

 

After your finished with the frosting grab some patriotic sprinkles and go crazy! You can never have too many sprinkles! 🙂

 

 

Easy right? Leave a comment below to tell us what you thought!

Filed under: UncategorizedTagged with: , , , , , , , ,

“CHALK TO ME”:
A Chalkboard Serving Tray

 

 

This post contains affiliate links. We choose to only provide affiliate links for the products or businesses we trust and use personally. The affiliate links are provided for your convenience to recommended products and to help support the Navy Home. You can find our full disclosure here.

 

Wedding Season: Part Two

Summer is fast approaching and that means pool parties, BBQ, and good company! All of this equals up to everyone’s favorite thing – entertaining! With entertaining comes serving ware. I was actually searching for wedding gift inspiration when I stumbled upon the idea of these neat chalkboard serving trays. I decided to give it a go and make one as a wedding gift for my best friend in addition to using the tray at her bridal brunch. I definitely fell in love with the finished product and wanted to keep it for myself. 🙂 Needless to say, I will certainly be making one for us pretty soon! If you need a great gift idea this is it!

 

Materials

1×12 Pine Wood (at 30” long)

Wood Stain

Polyurethane

Chalkboard Paint

Painters Tape

Staining Rag or Paper Towels

(2) Sponge Brushes

(2) Decorative Handles

(4) ½” Screws

Electric Sander

Electric Drill

Electric Saw (if needed)

Gloves + Mask

Wood Burning Kit (optional)

 

 

Prep + Wood Burning

Begin by either finding a piece of scrap wood in your garage, or by cutting a board to your chosen dimensions. I had managed to find the perfect size of scrap board in our garage that was left over from a previous project we had done – no cutting required! Use an electric sander to round all corners and edges of the tray. I wanted to add a unique feature to the back of the tray so I chose to wood burn my logo into the lower corner. If you would like to add a special feature of your own just follow these simple steps! Print out the image or text onto a piece of paper at the size you want. Lay the paper onto the wood and use a pencil to trace the outlines you wish to display. Press hard when tracing with the pencil to make indents on the wood. Remove the paper when you are finished and make sure all of the outlines you want are pressed into the wood. Simply trace the outlines with your wood burning kit and you are ready for staining.

 

Note: I recommend working in a well-ventilated space because the burning wood can get stinky! Please be careful when working with wood burning kits as they can burn more than just the wood!

 

 

Stain + Polyurethane

Select your choice of stain color and apply with an old rag or paper towels. Apply additional coats until you reach the desired color, allowing for adequate time to dry between each coat. Next, use a sponge brush to apply a thin coat of polyurethane, allowing for adequate time to dry between each coat. I decided on two coats of polyurethane to be sufficient for the tray.

 

Note: Read all the directions on each product before use. Remember to stir the stain and polyurethane before use, do not shake. If using paper towels to apply stain, make sure the paper towels are not too soft and leave paper remnants on the project. Always wear a mask and gloves when applying stain or polyurethane along with working in a well-ventilated space. A well-ventilated space creates a cleaner workspace to breathe in and faster drying time.

 

 

Tape + Paint

Once your tray is nice and dry, apply painter’s tape around the edges to form the area that will become the chalkboard surface. Before applying the tape, I recommend 24-48 hours drying time depending on the weather. Using the painter’s tape, create a 1” border along the length of the tray with a 2” border along the widths where the handles will be added later. Be sure to press tape down firmly around all edges to ensure the chalkboard paint will not bleed underneath.

 

Time to pop open your can of chalkboard paint and get to painting! I must admit this is when I walk outside, find a stick in the yard, and use it to stir my paint. 🙂 I am not too sure professionals would recommend this method, but it works for me. Use a sponge brush to apply a thin coat of chalkboard paint to your tray within the taped off work space. When painting at the tapes edge, make sure your brush is lightly soiled with paint and paint with strokes moving away from the tape, not towards. If you paint with stroke towards the tapes edge you are liable to end up with paint under the tape resulting in an unclean line after the tape is removed. When painting the length of the area, follow the edge of the tape with your brush to ensure all strokes move in the same direction. Apply additional coats until you reach the desired thickness of chalkboard surface, allowing for adequate time to dry between each coat. I chose to do five coats of chalkboard paint to build up the surface some compared to the stained surface.

 

Note: Read all the directions on each product before use. Remember to stir the paint before use, do not shake. I recommend wearing a mask and gloves when applying paint along with working in a well-ventilated space. A well-ventilated space creates a cleaner workspace to breathe in and faster drying time.

 

 

Assembly

After your new chalkboard surface is completely dry, especially at the tapes edge, carefully remove the tape by pulling at a slight angle towards the painted surface. The only thing left is to attach your decorative handles! Mark off the locations for your screws, use an electric drill to make small pilot holes, lay the handles in place, and drill in the screws.

 

You’re done! Look at that beauty! Now you have a fun and beautiful chalkboard serving tray for all your summer festivities!

 

Don’t miss out on the other posts in our wedding season series!

 

 

Thinking about making this tray or have already done so? Leave us a comment below to share!

Filed under: UncategorizedTagged with: , , , , , , , ,